Checkweigher System, Optiweigh, Model IW 600 is primarily used for weighing and segregating packs for low or high weight, during the packing.
The checkweigher is easy to integrate in any existing line and occupies less space.
The system consists of Inlet, Weighing and Exit Conveyor. The exit conveyor has a suitable rejection mechanism that works on pneumatic supply.
» Technical Specifications
Note:
(a) (*) Depends on pack dimension, product's nature, speed, field conditions, transportation behaviour of the product etc.,
(b)Due to continuous development in the product, the specifications stated above subject to change without prior notice.
(c) (**) System length can change depending on the rejection device selected.
| Optiweigh | IW 600 |
| weighing range | 15 - 600 g |
| Throughput | upto 200 Packs/min |
| Accuracy * | ± 0.1 g |
| Product Length | 80 - 180 mm |
| Product Width | 10 - 160 mm |
| Product Height | 10 - 90 mm |
| Belt Speed | upto 90mtrs/min |
| Operating Height | 760-820 mm |
| System Length ** | 800 mm |
| Interface-optional | RS 232, Ethernet |
| Power Supply | 230 VAC single phase, 50 HZ 200 VA |
| &Temperature Range | 5° C - 50° C |
| Pressurized Air | 4-6 Bar |
| MOC | SS304 |
| Weighing Device | Weigh Cell (EMFC) |
